NEW MILLTRONICS ML26/160 2 Axis Combination Lathe

Call for Pricing

Inventory Number:
Product Code:



  • Milltronics 8200-B series CNC control
  • Solid box way bed construction
  • 1600 RPM spindle
  • Tailstock
  • Auto lubrication
  • Single sliding door enclosure design
  • 6" Spindle bore w/ A2-11 Nose
  • Rear mount chuck flange
  • 12" LCD color display
  • Chip conveyor w/ wash down
  • Spindle load meter
  • Flood coolant
  • Solid model graphic display
  • USB Port
  • Gap bed design
  • 8 Station 1" automatic turret
  • LCD hour meter
  • Thread chasing feature
  • One year warranty
  • CSS




X axis travel                                                                       13" (330 mm)

Z axis travel                                                                       163" (4140 mm)

Swing over bed (diam)                                                        27" (685 mm)

Swing over gap (diam)                                                        34.2" (870 mm)

Swing over cross slide (diam)                                             16.1" (410 mm)

Gap distance                                                                      12.75" (320 mm)


Spindle nose                                                                       A2-11

Spindle bore                                                                       6" (153 mm)

Spindle range                                                                     30-1600 RPM

AC spindle motor                                                                24/15 HP (18/11 kW) 2 Speed Delta/WYE

Spindle torque                                                                    1250 ft-lbs (1690 N.m)


Tailstock quill travel                                                            6" (150 mm)

Tailstock quill diameter                                                       3.94" (100 mm)

Tailstock quill taper                                                            MT5



Number of tools                                                                  8

Tooling size                                                                        1" (25 mm)

Boring bar capacity                                                             1.5" (38 mm)

Tool selection                                                                     Bi-directional



X, Z axis rapid traverse rate                                                500 IPM (12.7 m/min)

Max. cutting feed rate                                                         100 IPM (2540 mm/min)

X axis ball screw diameter                                                  1.25" (32 mm)

Z axis ball screw diameter                                                   1.97" (50 mm)

Positioning accuracy                                                           +/- 0.00025" (+/- 0.0063 mm)

Repeatability                                                                       0.0002" (0.005mm)

Axis thrust force X,Z                                                           4000 lbs. (1815 kg)



Machine Height                                                                   83" (2108 mm)

Floor Space Required (W x D)                                             252.5" x84" (6413 x 2133 mm)

Machine Weight                                                                  17,200 lbs. (7800 kg)

Power required                                                                   30 KVA / 80 amps

Voltage required                                                                 208-240 Volts / 3 Phase




The bed, cross slide, and saddle are composed of Meehanite cast iron, which includes very high dampening characteristics. Heavily ribbed castings provide superior dampening decreasing vibration and harmonics providing aggressive turning ability.  The bed casting and saddle are stress relieved to ensure machine geometry is maintained. Spacing of the solid box bed ways creates optimal support for the saddle in full travel. The gap (12.75") allows larger turning near the spindle. The "T" slotted cross slide is fully ground and hardened and allows easy mounting of custom tooling. 


The X & Z-axis way surfaces are hardened and ground with turcite. The square box ways on the Z axis provide added rigidity and strength over a conventional "V" way. Additionally the Z axis ways are widely spaced (405 mm) increasing the stability of the bed and slide providing superior cutting performance. The way surfaces on both axes utilize gibs with easy adjustment to maximize rigidity and maintain geometry throughout the life of the machine tool.


The fully balanced spindle is driven using a 24/15 HP (18/11 kw) 2 Speed Delta/WYE closed loop full regen AC servo motor. Heavy exterior ribbing on the headstock allows for added rigidity and increased surface area for heat transfer. The spindle is directly driven eliminating gears, oil pumps, vibration, and noise. Five high precision, large diameter permanently greased angular ball bearings support the spindle allowing for heavy work pieces. CSS function is standard promoting longer tooling life and improved part finish. A rear chuck mount is standard with the 6" spindle bore.


Each axis is driven using a high precision, fully ground ball screw. Each ball screw is supported on each end using angular contact thrust bearings to achieve high rapid traverse rates and thrust. The Z axis ball screw is directly driven using AC servo type motors minimizing backlash and vibration. The 5 mm (X) and 10 mm (Z) pitch ball screws provide a high level of accuracywhile maintaining adequate thrust.


An 8 position automatic turret provides quick, reliable tool changes. Turning holders utilize 1" square shank tooling and boring bar holders can accommodate 1.5". The bi-directional turret comes standard with 1 boring bar holder and 1 axial tool holder. Additional holders are available and are interchangeable from station to station.


Automatic lubrication is provided to the way surfaces and ball screws with oil to eliminate wear. Way oil is delivered by metered valves, which precisely control the volume. A low oil-level alarm warns the user preventing possible damage to the way surfaces and ball screws.


The design of the interface free tailstock allows for full cutting along the Z axis travel. The oversized tailstock is ideal for supporting heavy work pieces. The tailstock is easily positioned using a carriage connection coupler. The quill can be moved manually up to 6". A MT#5 dead center is provided with the tailstock.


A high volume coolant pump (3/4HP) delivers coolant to the coolant nozzle(s) on each turret station. The 127 gallon coolant tank is separate from the machine bed allowing for quick and easy maintenance. The chip wash down system moves the chips into the chip conveyor using high pressure coolant.  The belt type chip conveyor removes the chips from the machine.


The edit key enables protection of programs as well as parameters of the 8200-B CNC control. Removal of the key limits a user from loading programs and parameters such as work coordinates and tool offsets. With the edit key in the off position the data in the CNC control is available for editing.


  • Milltronics 8200-B CNC
  • 12" Color LCD display
  • Ethernet Connection
  • USB Port
  • Auxiliary Keyboard jack with keyboard
  • Offline FastCAM software for programming
  • User Definable Custom Macros
  • Feedrate and Spindle speed overrides
  • Spindle load meter
  • Edit key lock-out switch
  • LCD hour meter
  • Tri-color end of cycle warning light
  • Single spare "M" function with CNC wait channel
  • Rigid Tapping
  • Remote Handwheel (MPG)
  • Work light
  • Meehanite cast iron bed
  • Gap bed design
  • 1600 RPM spindle
  • Cartridge spindle design
  • 24/15 HP (18/11 kW) 2 Speed Delta/WYE spindle motor
  • 6" Spindle bore w/A2-11 Spindle nose
  • Rear mount chuck flange
  • Fully ground solid ways with turcite
  • Flood coolant
  • Sliding door enclosure design
  • Chuck guard with safety switch
  • Door interlock safety switch
  • AC Servo motors driven to oversized ball screws on all axes
  • Double anchored ball screws
  • 500 IPM Rapid Traverse rate
  • Matched AC Servo Amplifiers on all axes
  • CSS and Feed/rev with threading, rigid tapping, and thread chasing cycles
  • Rear mounted 8 Station 1" Automatic Turret
  • Automatic Turret includes One Boring Bar Holder and One Axial Tool Holder
  • Dual Electronic Handwheels for Teach, manual or automatic operation
  • Tail Stock latch and position coupler
  • Automatic metered way oil lubrication
  • Instruction manual, parts list, and electrical drawings
  • UL certified
  • Operator and maintenance manuals
  • One year warranty

Milltronics 8200-B Series CNC Control Features

  • 12" LCD color display
  • 2000 blocks/second high speed processor
  • Conversational programming
  • Fanuc based G&M Code programming
  • Inch/Metric Conversion / programming
  • Manual Machine Operations
  • Single Automatic Operation w/Teach Mode
  • Auto routines
  • User definable macros with trig assist
  • Custom Macro B
  • Auto DXF file import
  • Part and wire frame tool path graphics
  • Solid Model Graphic Display
  • Onboard diagnostics
  • Spindle load meter
  • Part counter display
  • 1 GB parts program memory
  • Networking
  • USB Port
  • Manual pulse generator
  • Coordinate rotating
  • Scaling
  • Mirror image
  • Feedrate and Spindle Override
  • Tool radius and length offsets (24 total)
  • Tool Load Monitoring
  • 6 Work Coordinates (G54-G59)
  • G92 Coordinate system setting
  • Backlash Compensation
  • Ballscrew pitch error compensation
  • Rigid tapping/ threading cycles
  • Canned cycles including:
    • Drilling
    • Turning
    • Facing
    • Boring
    • Tapping
    • Grooving
    • Threading
    • 3D Pocket/Sweep
    • Tangent/Circle Generate
  • Subprogram Call-50 nested programs maximum
  • MDI
  • Background Editing
  • Program/Parameter protect