FRYER EL-32 CNC COMBINATION LATHE

FRYER EL-32 CNC COMBINATION LATHE

Call for Pricing
800-759-7337

Hardinge Conquest T42 2-Axis CNC Turning Center, S/N SGA-1851-B, New Approx 1997/98.

Hardinge Conquest T42 2-Axis CNC Turning Center, S/N SGA-1851-B, New Approx 1997/98.

$10,500.00

Catalog Specifications:  Max Swing Over Bed - 19.5"  Cross Travel (X-Axis) - 5.45"  Longitudinal Travel (Y-Axis) - 13.65"  Rapid Traverse Rate (X) - 472 ipm Rapid Traverse Rate (Z) - 620 ipm Turret To...

Hardinge Conquest T51 CNC Turning Center with LNS Barfeed, S/N CL-186-CBB, New 1993.

Hardinge Conquest T51 CNC Turning Center with LNS Barfeed, S/N CL-186-CBB, New 1993.

$13,750.00

Specifications: Swing diameter over upper way cover … 26” Max distance from spindle face to turret … 23.12” Spindle thru hole - 2.5"  Round collet thru capacity … 2” Spindle m...

MAZAK Model Quick Turn 8N CNC Turning Center, S/N 104721-U, New 1992.

MAZAK Model Quick Turn 8N CNC Turning Center, S/N 104721-U, New 1992.

$10,500.00

Specifications: Max Cutting Diameter - 6.29"  Max Machining Length - 11.22"  Max Swing - 11.81"  Rapid Traverse Rates - 1180 IPM Z-Axis Travel - 11.42"  X-Axis Travel - 3.75" Motor Drive - 7½ HP  Spin...

Milltronics SL14/6 CNC Turning Center, S/N 8701, New Approx 2005.

Milltronics SL14/6 CNC Turning Center, S/N 8701, New Approx 2005.

$29,900.00

Specifications:  Swing Over Way Cover – 16.54”  Swing Over Carriage – 8.86” Travel (X Axis) Cross Slide – 5.28"  Travel (Z-Axis) Long Slide – 14.37"  Bar Capacity, Diameter - 1.5"...

Okuma Cadet Parts Machine
(bad X-axis drive)

Okuma Cadet Parts Machine (bad X-axis drive)

Call for Pricing
800-759-7337

Okuma Cadet Turning Center

Okuma Cadet Turning Center

$9,950.00

Offered as is as removed from service.  OSP5020L Control  8" 3-Jaw Chuck No Tailstock No Chip Conveyor Manuals Included Weight, Approx 9900 Lbs. ...

OKUMA LB10 CNC Turning Center, S/N 1566.

OKUMA LB10 CNC Turning Center, S/N 1566.

$7,950.00

Offered as is , as removed from service. No warranty or return privilege.  Specifications: Max Turn Diameter X Length (Chucker)         5.91” x 4.72” Max Turn Diameter X Length ( Shaft)             5...

Okuma LNC8 Cadet CNC Turning Center, S/N E213. Offered as is, needs spindle servo drive replaced.

Okuma LNC8 Cadet CNC Turning Center, S/N E213. Offered as is, needs spindle servo drive replaced.

$9,900.00

Equipped with:  10" 3-Jaw Chuck 3/60/220 VAC Electrics  OSP700L Control  Jorgenson Chip Coneyor  Upgrade Okuma Floppy to USB Conversion  Operator and Service Manuals Included  Machine gives alarm 1058...