Kent USA ML-1740 Engine Lathe

$17,550.00

Inventory Number:
32015
Product Code:
ML-1740
Brand:
Kent

Description

Kent USA ML-1740T Precision Lathe

  • 7.5 HP Spindle Motor
  • 3.125” Spindle Through Hole
  • Solid Full Length Casting Base with Front Loading Chip Tray for Easier Cleaning
  • Adjustable Over-load Feed Clutches
  • Quick Reversal Feed from Apron
  • Full-length Safety Foot Brake
  • Spindle Jog Button Control
  • One-shot Lubrication for Apron, Carriage, and Bed Ways
  • Multi-position Adjustable Feed Position Stops
  • Dual Inch/Metric Calibrated Tailstock Quill with Knockout Tang; Heavy Duty Two Speed Tailstock
  • Dual Inch/Metric Dials with Quick-change Sleeve

 

GENERAL SPECIFICATIONS

 

Capacity

Swing over bed ways

17” (435mm)

Swing over cross slide

10.875” (277mm)

Swing over gap

24.5” (622mm)

Gap length (w/ face plate)

8” (200mm)

Bed width

12” (305mm)

Distance between centers

44” (1120mm)

Headstock

Spindle hole

3.125” (80mm)

Spindle nose camlock

D1-6

Spindle to sleeve taper

MT#7 – MT#4

Spindle speed

12 Steps, 36 – 1800 RPM

Spindle speed ranges

N/A

Carriage

Bearing length on ways

17.3” (440mm)

Cross slide width

7.25” (185mm)

Cross slide travel

10.6” (270mm)

Top slide (compound) travel

4.75” (120mm)

Feed Box

Thread capacity (inches)

45, 2 - 72 TPI

Thread capacity (metric)

39, 0.2 - 14 MM

Modular threads range

18, 0.3 - 3.5 M

Diametral pitch range

21, 8 – 44 DP

Longitudinal feeds

0.0015 – 0.04 IPR

Cross feeds

0.00075 – 0.02 IPR

Tailstock

Quill diameter with tang

2.3” (59mm)

Quill travel

5” (130mm)

Quill taper

MT#4

Power

Main motor

7.5 HP

Coolant pump motor

1/8 HP

Control circuit voltage

115 V

Dimension

Shipping dimension

95”x39”x63”

Weight

Net weight (approx)

3850 LBS

Gross weight (approx)

4510 LBS

 

STANDARD ACCESSORIES

 

  • 3-jaw chuck (10”)
  • Chuck cover
  • Steady rest
  • Follow rest
  • 4-position tool post
  • Coolant system
  • Full length splash guard
  • Halogen work light
  • Carriage stop
  • Thread chasing dial
  • 3 position carriage stop
  • Bed mount carriage stop

 

POWER REQUIREMENTS: 230 volts, 3-phase, 60 Hz, 30 Amp (Standard) / 460 volts, 3-phase, 60 Hz, 15 Amp (Avail on order)

Total Package Price for (1) Kent USA ML-1740T                                                                        $17,550.00

Specifications and pricing subject to change or improved without prior notice.

OPTIONS AND ACCESSORIES

 

Newall DP700 DRO (2-axis, x=0.0001”/z=0.0002” res)*.....$ 2,300.00

DRO installation charge........................................... $   350.00

Aloris CA #4-SET (Tool Post and 6 holders)............. $ 1,500.00

5C lever style collet closer*......................................... $ 1,250.00

Royal spindle type live center (M.T. #4).....................  $   670.00

BTC 3-jaw chuck w/back plate (Zero-set, 8” D1-6).....$   980.00

BTC 3-jaw chuck w/back plate (Zero-set, 10” D1-6).. $ 1,270.00

4-jaw independent Chuck (10” D1-6)......................... $   695.00

Face plate (12” D1-6)................................................  $   650.00

Taper turning attachment*.........................................  $ 1,950.00

Micrometer carriage stop...........................................  $   350.00

Rustlick coolant (1 gallon, mixes 1:30)........................$    50.00