Your Full Service Machine Tool Distributor

  

We accept

 

 

 

Vertical Machining Centers

 VM25 Machining Center
 Starting at $79,980

Table Size Travels HP
56" x 24"
1420 x 610 mm		 50" x 25"x 24"
1270 x 635 x 610 mm		 24/15 HP Two Speed
18/11 kw
This new style VM25 is a heavy duty high speed machine that features oversized ball screws and linear rails. Our newly designed 15,000 pound casting affords superior rigidity and damping characteristics for rugged performance and large travel.  This "American Built" machine is a great machine and a great value for the price

  • Chip auger with optional conveyor for chip removal

  • Huge fully ground machine table with 5 T -Slots

  • Automatic Lubrication

  • Spindle cartridge cooling system

  • 15HP closed loop WYE/Delta spindle motor with options to 30 HP

  • Spindle options to 15,000 RPM

  • AC Yaskawa digital servos

  • 110mm O.D. 5 bearing spindle with air-purge seal

  • Inverted rail design in X axis means table support is always centered under the spindle

  • 1000 IPM X, Y, Z rapid traverse, Optional 1600 IPM

  • Fully ground double anchored ball screws

  • High speed Centurion PC based conversational control

  • Networking capable

Machine Specifications and Prices
This new style VM25 is a heavy duty high speed machine that features oversized ball screws and linear rails. Our newly designed 15,000 pound casting affords superior rigidity and damping characteristics for rugged performance and large travel.  This "American Built" machine is a great machine and a great value for the price
  • Chip auger with optional conveyor for chip removal
  • Huge fully ground machine table with 5 T -Slots
  • Automatic Lubrication
  • Spindle cartridge cooling system
  • 15HP closed loop WYE/Delta spindle motor with options to 30 HP
  • Spindle options to 15,000 RPM
  • AC Yaskawa digital servos
  • 110mm O.D. 5 bearing spindle with air-purge seal
  • Inverted rail design in X axis means table support is always centered under the spindle
  • 1000 IPM X, Y, Z rapid traverse, Optional 1600 IPM
  • Fully ground double anchored ball screws
  • High speed Centurion PC based conversational control
  • Networking capable

Machine Specifications and Prices

 VM25-IL Inline Spindle Machining Center
 Starting at $89,980

(VM25 Picture Shown)
Table Size Travels HP
56" x 24"
1420 x 610 mm		 50" x 25"x 24"
1270 x 635 x 610 mm		 24/15 HP Two Speed
18/11 kw
 

 VM30 Machining Center
 Starting at $89,980

(VM25 Picture Shown)
Table Size Travels  HP
 56"x 24"
1420 x 610 mm		 50" x 30"x 24"
1270 x 760 x 610 mm		 24/15 HP Two Speed
18/11 kw
 
The newly designed VM30 offers oversized machine castings with massive ribbing that provides the maximum in strength, rigidity and dampening qualities, along with oversized ball screws and linear rails to ensure the highest possible cutting performance in this large travel machine.  This "American Built" machine pound per pound, inch per inch, offers the best value in a machine tool today.
  • Chip auger or optional conveyor for chip removal
  • Huge fully ground machine table with 5 T -Slots
  • Automatic lubrication
  • Spindle cartridge cooling system
  • 15HP closed loop WYE/Delta spindle motor with options to 30 HP
  • Spindle options to 15,000 RPM
  • AC Yaskawa Digital Servos
  • 110mm O.D. 5 bearing spindle with air-purge seal
  • Inverted rail design in X axis means table support is always centered under the spindle
  • 1000 IPM X, Y, Z rapid traverse, Optional 1600 IPM
  • Fully ground double anchored ballscrews
  • High speed Centurion PC based conversational control
  • Networking capable

Machine Specifications and Prices
The newly designed VM30 offers oversized machine castings with massive ribbing that provides the maximum in strength, rigidity and dampening qualities, along with oversized ball screws and linear rails to ensure the highest possible cutting performance in this large travel machine.  This "American Built" machine pound per pound, inch per inch, offers the best value in a machine tool today
  • Chip auger or optional conveyor for chip removal
  • Huge fully ground machine table with 5 T -Slots
  • Automatic lubrication
  • Spindle cartridge cooling system
  • 15HP closed loop WYE/Delta spindle motor with options to 30 HP
  • Spindle options to 15,000 RPM
  • AC Yaskawa Digital Servos
  • 110mm O.D. 5 bearing spindle with air-purge seal
  • Inverted rail design in X axis means table support is always centered under the spindle
  • 1000 IPM X, Y, Z rapid traverse, Optional 1600 IPM
  • Fully ground double anchored ballscrews
  • High speed Centurion PC based conversational control
  • Networking capable

Machine Specifications and Prices

 VM30-IL Inline Spindle Machining Center
 Starting at $99,980
(VM25 Picture Shown)
Table Size Travels  HP
 56"x 24"
1420 x 610 mm		 50" x 30"x 24"
1270 x 760 x 610 mm		 24/15 HP Two Speed
18/11 kw
 
The newly designed VM30XP offers oversized machine castings with massive ribbing that provides the maximum in strength, rigidity and dampening qualities. Along with these castings, the VM30XP will utilize roller type linear ways that provide 44% more rigidity than the more commonly used ball type ways used on other linear rail machines. The added advantage of increased rigidity stems from the increased amount of contact from the roller bearing to the rail surface compared to the rail contact provided from a spherical ball bearing. This roller bearing technology is only available on the highest priced machining centers manufactured throughout the world. Milltronics is bringing this technology to market in the United States at a price affordable to the general machining industry.

 VM30XP Machining Center
 Starting at $109,980

Table Size Travels  HP
 56"x 24"
1420 x 610 mm		 50" x 30"x 24" - Optional 60"
1270 x 760 x 610 mm		 24/15 HP Two Speed Gearbox
18/11 kw

Machine Specifications and Prices

 The added rigidity of roller type linear rails on the VM30XP has lent itself to the use of a 50 taper, 8000 RPM spindle designed around a two speed geared head that is capable of delivering 425 ft/lbs of torque from 50 - 400 RPM. Combined with 1000 ipm rapid traverse rates and a 32 pocket arm type automatic tool changer, this machine will add productivity to any application.

This "American Built" machine pound per pound, inch per inch, offers the best value in a machine tool today
  • Chip auger or optional conveyor for chip removal
  • Huge fully ground machine table with 5 T-Slots
  • Automatic lubrication
  • Spindle cartridge cooling system
  • 35HP closed loop spindle motor with two-speed gearbox
  • AC Yaskawa Digital Servos
  • 110mm O.D. 5 bearing spindle with air-purge seal
  • Inverted rail design in X axis means table support is always centered under the spindle
  • 1000 IPM rapid traverse
  • Fully ground double anchored ballscrews
  • High speed Centurion PC based conversational control
  • Networking capable
 
Milltronics VM Series machines are manufactured completely in America.  Advanced designs and incredibly low prices make the VM machines among the highest value in the world.  All table surfaces and bearing way mounting surfaces are precision ground.   All VM spindles come with five spindle bearings and cartridge cooling system. Milltronics will customize your machine configuration to add 4th or 5th axis or remove ATC or enclosures

Not responsible for typographical errors.

Return to Main Milltronics Page

  

Copyright © 1999-2008
Advanced Machinery Companies
All Rights Reserved.


 

Milltronics    Vertical Machining Centers   VM25   VM25-IL   VM30   VM30-IL  VM30XP