Kurt Workholding Solutions and Vises at Advanced Machinery Located in Dayton, Ohio

Your Full Service Machine Tool Distributor

We accept

AngLock® D-Series Vises

The original Kurt Anglock D-Series vises are designed for precision part clamping on basic machine tools such as knee-type mills, grinders and machining centers. D-Series vises are ideal for use in running production parts where datums, flatness and parallelism is important. You can precision bore, tap, drill, grind and finish with high accuracy on most parts made of die cast aluminum, steel, and iron in your Kurt Anglock vises. No other brand can give you the time proven accuracy of the Kurt Anglock vises.

All Kurt vises have a friction reducing, needle bearing, thrust collar. The needle bearing increases jaw clamping pressure.

D675

The D675 has a new vise body with four major improvements:

Powder coat paint resists peeling.
Machined rail allows precision alignment.
A 7-1/2" jaw opening.
Stationary jaw features an integral key and larger fasteners that reduces deflection by 50%.

With a jaw opening of 10 inches and clamping force up to 11,600 lbs., the D810 vise is ideal for precision clamping very large parts for both tool and die and production CNC applications.

D810

D40

The D40 vise is recommended for intermediate milling and grinding work. It is an ideal vise for use in matched multiples for holding long parts. With jaw plates in their outside positions, this 4 inch vise has a capacity of 10-5/16 inches.

The D688 features a large 8.8 inch jaw opening. with approximately a 20% increase in clamping pressure over the D675. The machined edge of the vise allows precision alignment of vise when used on angle plate with sine bar for locating.

D688

D100

The D100 is the largest and strongest of the general purpose vises. With 9-3/4 inches of jaw opening it has the capacity and strength to take on your highest horsepower milling cuts. It's the most precise and rugged 10 inch production vise in the world.

HD CarvLock® Vises, HD and HDL Towers and HDL AngLock® Vises

HD Vises
Manual and Hydraulic

The HD CarvLock Vises are High-Density, Heavy-Duty systems, which are either manually or hydraulically actuated. They feature two clamping stations with machinable jaws. The overall vise is very compact, making possible maximum density workholding across the full range of today’s machining centers. The HD Vise is equipped with quick change Anglock jaws in either aluminum or cast iron, depending on application requirements.

HDL Vise
Manual and Hydraulic

The HDL Anglock® Vises are high density long vises with two clamping stations which are either manually or hydraulically actuated. They provide repeatable clamping to 0.0002 inch. They combine high density with heavy duty features. Designed on a rugged 80,000 PSI ductile iron body with steel components, both models provide strength, rigidity and long term accuracy while absorbing machining vibration.

Call us at 1-800-759-7337.

Kurt Vises Kurt Mfg. Kurt Workholding Solutions